JUMBOMOBIL JM-VARIO Vacuum Slab Laying Machine

For the easy, exact and economical laying of concrete slabs, natural stones, slabs with exposed aggregates, large pavers, petrol station pavers and environmental pavers.

Chassis:
Rugged undercarriage (L x W = 1,300 mm x 1,300 mm / 51.51 x 51.51 in), 1 steering axle,
1 axle with hand brake, 4 pneumatic heavy duty wheels, compartments for counter weights, foldable supports.

Swing Crane:
Telescopic in height via a hand operated winch crane jib 3,9 m (153,54 in) in length and able to turn 350° with 4 different stopping points. Foldable down to 2 m (78.74 in) in length and 2 m (78.74 in) in height for easy transport.

Vacuum turbine unit VGE electrically driven (E):
Powerful vacuum turbine with 3-phase electrical motor, maximum underpressure 520 mbar (7,541 psi), incl. motor protection switch, plug CEE 32 A with integrated phase-switch, silencer, air-fil-ter with pre-separator. Type VGE-SB-L-E.

Vacuum Hose Lifter:
Supply hose, lifting unit, operating valve unit, hose-cylinder extension.
Lifting height -250 mm/9.84 inch (below ground level) to +1250 mm/49.21 inch.

incl. Suction plate

Further information

Extremely easy and light laying as the lifting and setting down are done by a vacuum hose lifter.
Exact positioning of slabs by means of a smooth-running pillar swing crane with low dead weight.
Slabs which have already been laid can easily be lifted again.
Can easily lay up to 400 square metres a day.
With knuckle boom for safe and quick installation even along house walls.

Technical details

Type	Order no.	Description	Type of Drive electric/AC	Electric Voltage/AC	Dead Weight	Working Load Limit/WLL -420 mbar	Load Extension	Type of Drive Petrol Engine
JM-VARIO-150-E-US	52000026-150	incl. Suction plate ESP-150-31/31	4,8 kW	230/460 V	1993 lbs	331 lbs	153,54 in
JM-VARIO-200-E-US	52000026-200	incl. Suction plate ESP-200-33/33	4,8 kW	230/460 V	1994 lbs	441 lbs	118,11 in
JM-VARIO-200-B	52000029-200	incl. Suction plate ESP 200-33/33			2006 lbs	441 lbs	118,11 in	8,1 kW

Accessories

BE-SPRINT-2:

Longer operating handles on request.

BE-ERGOSPRINT:

The new ergonomic operating valve unit for mounting on all HE lifting units and vacuum hose lifters, including JUMBOMOBIL JM, TRANSMOBIL TM and JUMBO-BV.

SZV:

Length 300 mm (11¾ inch).

SZV-250:

Length 300 mm (11¾ inch).

SWV-HE:

Suction plates are usually fixed to the operating valve unit BE or hose cylinder extension SVZ through two hook latches.
In case suction plates have to be changed continually, the quick change device SWV-HE is highly recommended.
When using lifting hose units HE-200 and He-250, the lifting hose unit is fitted directly to the lifting hose unit by means of 4 tension rods (threaded rods).

MFS-85-6-S-15Rd:

MFS-85-6-S-15Rd (rigid): Multiple suction plate (6 bellows) with various predefined hole spacings for mounting the bellows. Attached to the various lifting units HE (up to HE-150), you can lay up to 6 concrete blocks safely and quickly. Only 4 or 5 bricks can also be lifted. Bellows that are not required can be sealed with an optionally available protective cover and sealing plate and attached to the top of the lifting beam for trouble-free operation.

MFS-150-7-S-15Rd:

MFS-150-7-S-15Rd (rigid): Multiple suction plate (7 bellows) with various predefined hole spacings for mounting the bellows. Attached to the various lifting units HE (up to HE-150), you can lay up to 7 concrete blocks safely and quickly. It is also possible to lift only 5 or 6 bricks. Unused bellows can be plugged with an optionally available protective cover and sealing plate and mounted on top of the traverse for trouble-free operation.

MFS-150-4-S-20Rd:

MFS-150-4-S-20Rd (rigid): Multiple suction plate (4 bellows). Attached to the lifting units up to HE-150, 4 concrete blocks can be laid safely and quickly.

MFS-150-5-V-15Rd:

MFS-150-5-V-15Rd (movable): Multiple suction plate (5 bellows) with adjustable spacing. Attached to the lifting units up to HE-150, 5 concrete blocks can be laid safely and quickly. DIN18318 (road construction work, paving and paving slabs) stipulates a distance between the individual stones, particularly when laying gutter stones. For this reason, a hand lever can be used on this MFS to set a distance of 8 mm between the individual stones when raised. For block length 240 mm.

MFS-150-7-V-15Rd:

MFS-150-7-V-15Rd (movable): Multiple suction plate (7 bellows) with distance adjustment. Attached to the lifting units up to HE-150, 7 concrete blocks can be laid safely and quickly. DIN18318 (road construction work, paving and paving slabs) stipulates a distance between the individual stones, particularly when laying gutter stones. For this reason, a hand lever can be used to set a distance of 8 mm between the individual stones when the MFS is raised. For block length 160 mm.

UZ-BV: universal kerb stone clamp specially designed to grab the kerbs crossway. This is how curved kerb stones with different radiuses can be handled.

VZ-BV-98/100: this clamp has been specially designed to cope with the rare cases when kerb stones are too porous to be lifted with vacuum, so they therefore have to be lifted mechanically.

VZ-BV-40/104: this clamp has been specially designed to cope with the rare cases when kerb stones are too porous to be lifted with vacuum, so they therefore have to be lifted mechanically.

RG-VZ: Special clamp for the laying of 1, 2 or 3 grass stone slabs in one movement.

Type	Order no.	Description	Diameter outside	Dead Weight	Height Lifting Height	Working Load Limit/WLL -420 mbar	Working Load Limit/WLL	Dimensions LxW	Dimensions LxWxH	Angle	Dimensions oval, LxB	Number of Suction Plates	Shifting	Gripping Range	Inside Height	Length of Gripper
HE-150	42100132	Lifting Hose Units	9,06 in	41 lbs	59,06 in	331 lbs
HE-200	42101114	Lifting Hose Units	9,84 in	50 lbs	59,06 in	441 lbs
BE-SPRINT-2	42100539	Operating Valve Unit for HE-35 up to HE-250		19 lbs
BE-ERGOSPRINT	42101305	Ergonomic Vacuum Control Unit for HE-35 up to HE-250		30 lbs
SZV	42100007	Hose Cylinder Extension for HE-35 up to HE-150		7,05 lbs
SZV-250	42100008	Hose Cylinder Extension for HE-200 up to HE-250		13 lbs
SWV-HE	42101026	Quick Change Device for lifting hose units		8,38 lbs			551 lbs
ESP-85-25,5/25,5	42100051	Suction Plate		18 lbs		187 lbs		10,04x10,04 in
ESP-150-31/31	42100145	Suction Plate		6,17 lbs		331 lbs		12,20x12,20 in
ESP-200-33/33	42100331	Suction Plate		6,61 lbs		441 lbs		12,99x12,99 in
WSP-150-52/15-12-98°	52500184	Angeled Suction Plate		10 lbs		331 lbs			20,47x5,91x4,72 in	98 °Grad
WSP-150-70/8-11-143°	42100238	Angeled Suction Plate		13 lbs		331 lbs			27,56x3,15x4,33 in	143 °Grad
WSP-150-70/11-17-143°	42100126	Angeled Suction Plate		13 lbs		331 lbs			27,56x4,33x6,69 in	143 °Grad
WSP-150-85/7-7-135°	52300018	Angeled Suction Plate		13 lbs		331 lbs			33,46x2,76x2,76 in	135 °Grad
WSP-150-70/13-10-143°	52500131	Angeled Suction Plate		13 lbs		331 lbs			27,56x5,12x3,94 in	143 °Grad
WSP-150-90/10-14-93°	52300033	Angeled Suction Plate		15 lbs		331 lbs			35,43x3,94x5,51 in	93 °Grad
WSP-150-90/8-11-90°	42100795	Angeled Suction Plate		17 lbs		331 lbs			35,43x3,15x4,33 in	90 °Grad
MSP-3-S-150-3x22RD	42101192	Multiple Suction Plate		22 lbs		331 lbs					8,66 in	3 Stk.
MFS-85-6-S-15Rd	42101510	Multiple Suction Plate		24 lbs		187 lbs					5,91x5,91 in	6 Stk.
MFS-150-7-S-15Rd	42101500	Multiple Suction Plate		26 lbs		331 lbs					5,91x5,91 in	7 Stk.
MFS-150-4-S-20Rd	42101535	Multiple Suction Plate		26 lbs		331 lbs					7,87x7,87 in	4 Stk.
MFS-150-5-V-15Rd	42101542	Multiple Suction Plate		31 lbs		331 lbs					5,91x5,91 in	5 Stk.	0,31 in
MFS-150-7-V-15Rd	42101501	Multiple Suction Plate		33 lbs		331 lbs					5,91x5,91 in	7 Stk.	0,31 in
Protective cover	42101506	for Multiple Suction Plates MFS									5,91x5,91 in
Sealing plate	33510026	for Multiple Suction Plates MFS		0,22 lbs							5,71x5,71 in
UZ-BV	52300031	Radius Kerb Clamp		27 lbs			331 lbs							3,15-8,66 in	8,43 in	9,84 in
VZ-BV-98/100	42300001	Mechanical Kerb Stone Handle		18 lbs			331 lbs							38,58-39,37 in	2,76 in	3,94 in
VZ-BV-40/104	42300149	Mechanical Kerb Stone Handle		15 lbs			331 lbs							15,75-41,14 in	2,17 in	3,94 in
RG-VZ	42000003	Turf Stone Handle		26 lbs			154 lbs							3,94-19,29 in	3,15 in	1,97 in