HVZ-GENIUS-II Hydraulic Installation Clamp
The HVZ-GENIUS-II is a powerful excavator attachment tongs and a powerful all-rounder, now with significantly increased displacement force and all without electricity.
The highly efficient excavator attachment grab now with significantly increased shifting force.
With only one single hydraulic circuit required and the fully automatic selectable motion sequences the HVZ-GENIUS-II is a powerful all-rounder without being dependent on electric current.
Equipment for shifting other stone formats e.g. such as H-stones on request. No cost-intensive filter maintenance. Specific, automatic pushing-off device ADV. Complete with continuous hydraulic rotator, hoses and suspension for excavator, and now also includes a bracket for quick-release adapters. Safe gripping function depending on the condition of the spacers and the quality of the stones. Weight without hydraulic rotator, C-Profiles and suspension.
Further information
- An inspection glass provides a better view of the drum control’s direction of rotation.
- Large safety handles.
- Now with a scale for even easier adjustment of the main gripping width.
- Allows automatic shifting of rectangular pavers into running bond.
- Flush laying without any gap along walls and kerbs.
- Overlaying handles are quickly removable.
- No retrofitting of the excavator.
- The HVZ-GENIUS-II can be fit to all types of excavators. Thus no additional investment in case the clamp is to be attached to different types of excavators.
- Gripping range can be easily adjusted without additional tools.
- The supporting wheels can be adjusted easy and quickly through a crank handle.
- Grab swing brake between hydraulic rotator and excavator suspension.
- First-class, electrogalvanised material components guarantee optimum operating safety and long life cycle.
- Minimum operating weight of excavator from approx. 3.5 t.
Scope of supply
Technical details
Type | Order no. | Gripping Range | Hydraulic Connection Pressure | Hydr. Volumetric Flow | Hydr. Backflow Pressure , max | Weight Dead Weight | min. weight carrier | Inside Height | Height Stone/Element | Opening Width Main Gripper | Opening Width Side Gripper | Working Load Limit/WLL | Length of Gripper |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
HVZ-GENIUS-II | 51400042 | 600-1400 mm | 180-320 bar | 25-80 l/min | 10 bar | 339 kg | 3500 kg | 70 mm | 50-160 mm | 580-1470 mm | 960-1440 mm | 400 kg | 1000/1200 mm |
Accessories
By using the SW, the HVZ-GENIUS-II / HVZ-ECO can be fitted to all kind of excavators which are equipped with the Lehnhoff quick-change-device.
By using the SW, the HVZ-GENIUS-II / HVZ-ECO can be fitted to all kind of excavators which are equipped with the Lehnhoff quick-change-device.
By using the SW, the HVZ-GENIUS-II / HVZ-ECO can be fitted to all kind of excavators which are equipped with the Lehnhoff quick-change-device.
By using the SW, the HVZ-GENIUS-II / HVZ-ECO can be fitted to all kind of excavators which are equipped with the Lehnhoff quick-change-device.
By using the SW, the HVZ-GENIUS-II / HVZ-ECO can be fitted to all kind of excavators which are equipped with the Lehnhoff quick-change-device.
Suitable for most current excavators, maximum bolt diameter up to 70 mm, incl. adapter set of spacer sleeves.
Advantage: The HVZ can be quickly and easily fastened to any excavator.
Suitable for most current excavators, maximum bolt diameter up to 70 mm, incl. adapter set of spacer sleeves.
Advantage: The HVZ can be quickly and easily fastened to any excavator.
With the HVZ-VA-SUPERSOFT shifting adapters even „anti-shift pavers“ can be shifted easily and without damage.
The individual rows of pavers are spread apart a few millimetres in a V-shape before they are actually shifted.
The pavers can then be shifted without damage; the spacers are undamaged and there is no damage on the pavers themselves.
The main gripping width subsequently compresses the individual rows again and grips the paving block layer. This takes place in one operation.
The shifting adaptor can be easily retro-fitted onto the C-profiles on the side gripping width of the hydraulic installation claws.
With the HVZ-VA-SUPERSOFT shifting adapters even „anti-shift pavers“ can be shifted easily and without damage.
The individual rows of pavers are spread apart a few millimetres in a V-shape before they are actually shifted.
The pavers can then be shifted without damage; the spacers are undamaged and there is no damage on the pavers themselves.
The main gripping width subsequently compresses the individual rows again and grips the paving block layer. This takes place in one operation.
The shifting adaptor can be easily retro-fitted onto the C-profiles on the side gripping width of the hydraulic installation claws.
With the HVZ-VA-SUPERSOFT shifting adapters even „anti-shift pavers“ can be shifted easily and without damage.
The individual rows of pavers are spread apart a few millimetres in a V-shape before they are actually shifted.
The pavers can then be shifted without damage; the spacers are undamaged and there is no damage on the pavers themselves.
The main gripping width subsequently compresses the individual rows again and grips the paving block layer. This takes place in one operation.
The shifting adaptor can be easily retro-fitted onto the C-profiles on the side gripping width of the hydraulic installation claws.
With the HVZ-VA-SUPERSOFT shifting adapters even „anti-shift pavers“ can be shifted easily and without damage.
The individual rows of pavers are spread apart a few millimetres in a V-shape before they are actually shifted.
The pavers can then be shifted without damage; the spacers are undamaged and there is no damage on the pavers themselves.
The main gripping width subsequently compresses the individual rows again and grips the paving block layer. This takes place in one operation.
The shifting adaptor can be easily retro-fitted onto the C-profiles on the side gripping width of the hydraulic installation claws.
In conventional laying of paving layers with uneven paving rows and shifting with the hydraulic installation clamp into the 1/3-bond, the following situation arises:
The first installation row A can be installed entirely normally, i.e. the paving layers interlock cleanly on the side after shifting.
For the second installation row B, the paving layer must first be shifted into the 1/3-bond then the clamp must be raised and turned through 180° with no blocks.
Subsequently, the side gripping width is deactivated by means of a ball valve, the paving layer is clamped again, the clamp is turned back through 180° with the paving layer and then installed.
This must be done for every paving layer in even installation rows (2, 4, 6…), so that the running bond aligns.
With the HVZ-VA-180° shifting adapters from Probst this time-consuming effort is no longer required for installation of even installation rows.
The two shifting adapters are screwed onto the C-profiles of the side gripping width.
With a C grip, it is now possible by simple shifting of the two position adapters and by folding in and out the third position adapter, to adjust the side gripping width on which side 2 or 3 blocks are shifted into the 1/3 running bond.
The shifting adaptor can be easily retro-fitted onto the C-profiles on the side gripping width of the hydraulic installation claws.
Type | Order no. | Description | Weight Dead Weight | Working Load Limit/WLL | Dimensions Stone/Element LxW | Paver Layer RowsxStones/Row |
---|---|---|---|---|---|---|
LSW-MS-01 | 40110178 | Suitable for Lehnhoff-Type MS-01 | 19 kg | 800 kg | ||
LSW-MS-03 | 40110268 | Suitable for Lehnhoff-Type MS-03 | 29 kg | 1000 kg | ||
LSW-MS-08 | 40110269 | Suitable for Lehnhoff-Type MS/HM 08 | 75 kg | 1000 kg | ||
LSW-MS-03 + MS-08 | 40110434 | Suitable for Lehnhoff-Type MS-03 and MS-08 | 49 kg | 1000/1000 kg | ||
LSW-MS-01 + MS-03 | 40110479 | Suitable for Lehnhoff-Type MS-01 and MS-03 | 19 kg | 800/1000 kg | ||
Fork to LW 86 universal joint for LSW 03 + LSW 08 Lehnhoff adapter + UBA-1200/3000 | 40110278 | 3,6 kg | 1200 kg | |||
UBA-1200 | 41400571 | 15 kg | 1200 kg | |||
UBA-3000 | 41400088 | 18 kg | 3000 kg | |||
C-Profiles | 34010018 | 50 x 30 x 950 mm (2 x 1 x 38 inch) B x H x L | 6 kg | |||
C-Profiles | 34010046 | 50 x 30 x 860 mm (2 x 1 x 34 inch) B x H x L | 5,5 kg | |||
HD connection hose | 22000081 | 600 mm (24 inch) long for hydraulic rotator Indexator 12 L | 0,28 kg | |||
HD connection hose | 22000032 | 1,100 mm (44 inch) long for hydraulic rotator HVZ 10 L | 0,78 kg | |||
HD connection hose | 22000007 | 1,700 mm (67 inch) long – HVZ 12 L | 0,9 kg | |||
HD connection hose | 22000014 | 2,500 mm (10 inch) long – HVZ/VZ-HS 12 L | 1,1 kg | |||
HD connection hose | 22000312 | 3,000 mm (10 inch) long – HVZ 12 L | 1,7 kg | |||
HVZ-VA-SUPERSOFT-20/10-8x6 | 41400923 | 20 kg | 200x100 mm | 8x6 | ||
HVZ-VA-SUPERSOFT-24/16-5x5 | 41400924 | Shifting Adapter | 16 kg | 240x160 mm | 5x5 | |
HVZ-VA-SUPERSOFT-20/10-10x4-90° | 41400951 | 30 kg | 200x100 mm | 10x4 | ||
HVZ-VA-SUPERSOFT-20/20-4x6 | 41401025 | Shifting Adapter | 18 kg | 200x200 mm | 4x6 | |
HVZ-VA-180°-24/16-5x5 | 41400988 | Shifting Adapter | 13 kg | 240x160 mm | 5x5 |
Downloads
18,71 MB
18,89 MB
24,16 MB
24,09 MB
12,40 MB
474,90 KB
89,70 KB
Want to learn more?
Do you have any questions?
No delays, no "detours" – you can count on us! By e-mail or phone: Our team is ready to help you find the right solution.