Ring- and Cone Clamp RKZ-H
A hydraulic grab attachment for transporting up to 3 manhole rings with a height of 500 mm (19½ inch).
An adjustment to the widths is done hydraulically prior to the clamping action. This hydraulic change-over means that to operate the clamping and diameter setting action, only one hydraulic circuit is needed on the side of the fork lift truck.
The RKZ-HS is a heavy-duty model for up to 4 manhole rings with a height of 500 mm (19½ inch).
Supplied without connecting hoses to the fork lift truck.
If possible the Ring- and Cone Clamp RKZ-H/HS should be fitted onto the fork lift truck with a crane boom and a hydraulic rotator.
- Can also be used for single manhole cones due to its swinging grippers.
- Ideal for clearing the manufacturing area and for loading trucks.
- By clamping onto the walls of the products no radial pressure is exerted on the rings and so fairly green products can be removed from the manufacturing surface at a much earlier stage.
|Type||Order no.||Working Load Limit/WLL (lbs)||Weight Dead Weight (lbs)||Hydraulic Connection Pressure (psi)||Clamping Range (in)||Inside Height (in)||Diameter Nominal Diameter (in)|