Ring- and Cone Clamp RKZ-H

A hydraulic grab attachment for transporting up to 3 manhole rings with a height of 500 mm.
An adjustment to the widths is done hydraulically prior to the clamping action. This hydraulic change-over means that to operate the clamping and diameter setting action, only one hydraulic circuit is needed on the side of the fork lift truck.
The RKZ-HS?is a heavy-duty model for up to 4 manhole rings with a height of 500 mm.
Supplied without connecting hoses to the fork lift truck.
If possible the Ring- and Cone Clamp RKZ-H/HS?should be fitted onto the fork lift truck with a crane boom and a hydraulic rotator.
Further information
- Can also be used for single manhole cones due to its swinging grippers.
- Ideal for clearing the manufacturing area and for loading trucks.
- By clamping onto the walls of the products no radial pressure is exerted on the rings and so fairly green products can be removed from the manufacturing surface at a much earlier stage.

Technical details
Type | Order no. | Diameter Nominal Diameter (mm) | Hydraulic Connection Pressure (bar) | Weight Dead Weight (kg) | Inside Height (mm) | Working Load Limit/WLL (kg) |
---|---|---|---|---|---|---|
RKZ-H | 57200011 | 600-1500 | 180-210 | 680 | 1500 | 1750 |
RKZ-HS | 57200012 | 600-1500 | 180-210 | 790 | 2000 | 2300 |
Manuals
2,24 MB
2,44 MB
2,83 MB
2,95 MB
2,66 MB
More downloads
Product Page Ring- and Cone Clamp RKZ-H
132,67 KB