RKZ-H Ring- and Cone Clamp

A hydraulic grab attachment for transporting up to 3 manhole rings with a height of 500 mm (19½ inch).

An adjustment to the widths is done hydraulically prior to the clamping action. This hydraulic change-over means that to operate the clamping and diameter setting action, only one hydraulic circuit is needed on the side of the fork lift truck.
The RKZ-HS is a heavy-duty model for up to 4 manhole rings with a height of 500 mm (19½ inch).
Supplied without connecting hoses to the fork lift truck.
If possible the Ring- and Cone Clamp RKZ-H/HS should be fitted onto the fork lift truck with a crane boom and a hydraulic rotator.

Further information

Can also be used for single manhole cones due to its swinging grippers.
Ideal for clearing the manufacturing area and for loading trucks.
By clamping onto the walls of the products no radial pressure is exerted on the rings and so fairly green products can be removed from the manufacturing surface at a much earlier stage.