Manhole Ring Clamp RK-I/-II/-III

Also suitable for manhole rings (DIN 4034 Part 1 and 2) due to its extra-deep claws and rubber supports.
Adjusted to the dimensions of the manhole ring by bolts. As only the side wall is gripped, no radial pressure is exerted. Making it suitable for handling green products.

Further information

Fully mechanical operation, so it can be used with any lifting equipment.
Crane eye for attaching to crane hook.
Fully automatic change-over from “full” to “empty”.

Technical details

Type	Order no.	Working Load Limit/WLL (kg)	Dead Weight (kg)	Gripping Range (mm)	Diameter Nominal Diameter (mm)	Number of Claws (Pcs.)
RK-I	57200030	2000	170	80-160	800-1500	2
RK-I-US	57200032	3200	240	80-160	914-1524	2
RK-II	57200033	3000	320	80-160	1500-2500	3
RK-III	57200036	3000	350	80-160	2000-3000	3

Accessories

ET-RK with cross link: Fork sleeve for fork lift peaks. Suitable for the RK, off set design to save lifting height.

ET-RK swivel hook: Fork sleeve for fork lift peaks. Suitable for the RK, off set design to save lifting height.

ET with cross link: Fork sleeve for fork lift peaks. Suitable for RK or other devices, mounted directly above the gripper including lifting eye for attaching to crane hook.

ET 90° incl. cross link: Fork sleeve for fork lift peaks. Suitable e.g. for RK and AKZ-UNI, mounted directly above the gripper including lifting eye for attaching to crane hook. ET 90° design with manual turning device which arrests itself every 90°.

ET with cross link USA: Fork sleeve for fork lift peaks. Suitable for RK or other devices, mounted directly above the gripper including lifting eye for attaching to crane hook.

Type	Order no.	Working Load Limit/WLL (kg)	Dead Weight (kg)
ET-RK with cross link	47200002	3500	130
ET-RK swivel hook	47200028	3500	140
ET with cross link	47100010	4000	65
ET 90° incl. cross link	47110002	4000	65
ET with cross link USA	47100106	4000	65