Manhole Ring Clamp RK-I/-II/-III

Also suitable for manhole rings (DIN 4034 Part 1 and 2) due to its extra-deep claws and rubber supports.
Adjusted to the dimensions of the manhole ring by bolts. As only the side wall is gripped, no radial pressure is exerted. Making it suitable for handling green products.

Further information

Fully mechanical operation, so it can be used with any lifting equipment.
Crane eye for attaching to crane hook.
Fully automatic change-over from “full” to “empty”.

Technical details

Type	Order no.	Working Load Limit/WLL (lbs)	Dead Weight (lbs)	Gripping Range (in)	Diameter Nominal Diameter (in)	Number of Claws (Pcs.)
RK-I	57200030	4409	375	3,15-6,30	31,50-59,06	2
RK-I-US	57200032	7055	529	3,15-6,30	35,98-60,00	2
RK-II	57200033	6614	705	3,15-6,30	59,06-98,43	3
RK-III	57200036	6614	772	3,15-6,30	78,74-118,11	3

Accessories

ET-RK with cross link: Fork sleeve for fork lift peaks. Suitable for the RK, off set design to save lifting height.

ET-RK swivel hook: Fork sleeve for fork lift peaks. Suitable for the RK, off set design to save lifting height.

ET with cross link: Fork sleeve for fork lift peaks. Suitable for RK or other devices, mounted directly above the gripper including lifting eye for attaching to crane hook.

ET 90° incl. cross link: Fork sleeve for fork lift peaks. Suitable e.g. for RK and AKZ-UNI, mounted directly above the gripper including lifting eye for attaching to crane hook. ET 90° design with manual turning device which arrests itself every 90°.

ET with cross link USA: Fork sleeve for fork lift peaks. Suitable for RK or other devices, mounted directly above the gripper including lifting eye for attaching to crane hook.

Type	Order no.	Working Load Limit/WLL (lbs)	Dead Weight (lbs)
ET-RK with cross link	47200002	7716	287
ET-RK swivel hook	47200028	7716	309
ET with cross link	47100010	8818	143
ET 90° incl. cross link	47110002	8818	143
ET with cross link USA	47100106	8818	143