Vacuum Lifting Device SH-2500

Main Body robust and compact for use on the building site.
Working load limit: Type SH-2500-UNI up to 2,500 kg at - 0.6 bar.
The working load limit is dependent on the suction plate used.
Safety Devices:
Vacuum gauge
Safety vacuum storage tank
Pressure relieve valve
Various Means of Power:
E = electric, 230 Volt, single phase
B = petrol engine
Motor-protectoring switch, “Schuko” connector including connecting plug (only for SH-2500-UNI-E).
Manually operated valve for vacuum “on/off”.

Further information

Accoustic warning device with inbuilt intellegence. Batteries last approx. 1 year.
Operating handle in ergonomic position.
Fitted as standard with chain compartment and load securing chain.

Technical details

SH-2500-UNI-E: Plug type F, 230 V

Type	Order no.	Working Load Limit/WLL -600 mbar (kg)	Dead Weight (kg)	Electric Voltage /AC (50 Hz) (V)	Type of Drive electric/AC (50 Hz) (kW)	Type of Drive Petrol Engine (kW)
SH-2500-UNI-E	52400044	2500	116	230	0,55
SH-2500-UNI-B	52400043	2500	120			2,9

Accessories

SH-2500-HGV: Should be used when laying elements wider than 1 meter (39½ inch). This way, the employee is out of the danger zone during the application. Handle Extension SH-2500-HGV can be fitted at any time later to the structure of SH-2500 by bolting it on with brackets.

SH-2500-RS: The wheelset consists of two attachable main wheels, diameter 300 mm (11¾ inch), one support-wheel and one swivelling wheel. Later attachment to the basic device SH is no problem.