Vertical Guide SRF-900
Telescopic Guide for stationary equipment to lift the various devices (eg. pneumatic cubing clamp, rotating clamp or similar).
For fitting onto the available crane runway to be supplied site-wise.
Electric chain hoist (choice of lifting power), with 2 lifting speeds (electrical installation to be done by the customer).
Electric trolley with 2 speeds (electrical wiring done by the customer).
2 bottom boom carriages (unpowered), positioned suspended crossways to the direction of travel (to ease the handling of the attached devices and to improve the exact positioning of these devices).
Control bulb for 4 functions, with electroflex cable.
Crane hook for lifting a piece of equipment (with manual turning device which stops itself after each 90°).
Large plastic slides for the telescopic action.
Please state the type of crane runway on request.
- Work is made easier due to the electrical travelling operation and the electric chain hoist,
- particularly when moving paving stone equipment. (Stock- and sand-blasting equipment) or when cubing concrete products by hand, using the appropriate device.
- Pendulum movement is considerably minimized by using the SRF.
|Type||Order no.||Working Load Limit/WLL (lbs)||Weight Dead Weight (lbs)|