Fork Sleeves for Forks

For fixing onto the fork tines, with locking device on the forks.

Attention: loss of lifting height (Clamp inside height + approx. 495 mm/19½ inch, according to the model).
Various types of fork sleeves are available,
depending on the jobs in hand or the attachment device:

Fork Sleeves ET-IS-UNI with cardanic suspension of the clamp:
Designed for the installation of a hydraulic rotator as well as for the installation of a hydraulic swing damper (Only suitable for STAZ and STAZ-DZ-I). With security chain to avoid slipping.
Fork Sleeves Fixation ETA for ET-IS-UNI:
To avoid that the ET-IS uni slips off the forks. Different reach achievable by pin-adjustment.

Fork Sleeves ET-III-UNI for single clamps:
Screwed fix to the clamp to be picked up by the forks of the fork lift truck.
Can also be installed in a 90° turn position, due to the symmetrical flange plate.

Fork Sleeves ET-E-4 for single clamps:
Screwed fix to the clamp to be picked up by the forks of the fork lift truck.
As the fork sleeves can be picked up from the front and from the side it is possible to place the STAZ-UNI grippers either lenghtwise or across to the fork lift.

Further information

Advantage: short change-over time when adding other attachments to the fork lift.

Technical details

Type	Order no.	Working Load Limit/WLL (kg)	Weight Dead Weight (kg)	Load Extension (mm)
ET-IS-UNI-506	47110074	4000	140	1000
ET-IS-UNI-503-US	47110023	4000	150	1000
ET-III-UNI for STAZ-UNI-4	47110016	4000	130	700
ET-III-UNI for STAZ-UNI	47110019	4000	130	700
ET-E-4	47110052	4000	98	440-940