Professional tools

Block Cutter AL / AL-EASY with Rigid Blades

Order-Number: 51200037, 51200042, 51200049, 51200043, 51200046, 51200047, 51200048, 51200059, 51200037, 51200060, 51200061

The classic from Probst at ALMI.

The tried and tested block cutter from ALMI now also in tried and tested, galvanised

quality, exclusively at PROBST.

Snap blocks without great force: easy! With the perfect combination of lever and eccentric transmission, huge splitting force with minimal operating force is generated with all mechanical block snappers. Blocks can therefore be cut cleanly without dust, noise or wastewater. No particulate emissions occur, which are harmful to health. Both the staff and the environment are therefore protected.

AL-EASY:

  • Cut blocks with significantly reduced effort.
  • Clean cuts with precisely guided, square, reversible blade.
  • Suitable for cutting concrete paving.

NEW: AL-33-EASY-V/AL-43-EASY-V:

  • The required height of the stones can be set easily and quickly using a smoothly-operating hand-crank.
  • Improved technology resulting in effort saving of up to 20% when cutting blocks.
  • Blade has 4 cutting edges.
  • Tilting, spring-mounted supporting table allows clean undercut for precise laying without uneven large gaps.
  • Size indicator in cm and inches as well as 45-degree angle on both support plates speed up the work enormously!
  • AL-33-D/EASY-V: With tilted, rigid supporting table, so that the block is cut at a constant angle.

AL:

High rationalisation effect, as clean snapping of the blocks can often replace time-consuming and expensive cutting with masonry saws.

  • Clean cuts with precisely guided, square, reversible blade
  • Tilting, spring-mounted supporting table allows clean undercut for precise laying without uneven large gaps.
  • AL ... /U (-V): Designs also suitable for concrete kerbstones or limestones up to height 300 mm.
  • AL-33-D-V: With tilted, rigid supporting table so the block is cut continously at an angle.
  • New with AL-33-V and AL-43-V: Size indicator in cm and inches as well as 45-degree angle on both support plates speed up the work enormously!

AL-15-V:

  • Suitable for cutting slabs, concrete slabs and masonry blocks.
  • Improved technology resulting in effort saving of up to 34% when cutting blocks.
  • Blade has 4 cutting edges.
  • The required height of the stones canbe set easily and quickly using a smoothlyoperating knurled screw.
  • With a machine weight of 19 kg, it is very light and therefore easy to transport.
  • With supporting table with indicators for a 45 degree cutting angle on both sides.

AL-33-EASY-V [51200059]:

  • Cutting Length mm (in): 330 (13'')
  • Cutting Height mm (in): 10-120 (½ - 4¾'')
  • Dead Weight kg (lbs): 40 (88)
  • Surface: Galvanized

AL-33/D-EASY-V [51200060]:

  • Cutting Length mm (in): 330 (13'')
  • Cutting Height mm (in): 10-120 (½ - 4¾'')
  • Dead Weight kg (lbs): 42 (95)
  • Surface: Galvanized

AL-43/EASY-V [51200061]:

  • Cutting Length mm (in): 430 (17'')
  • Cutting Height mm (in): 10-120 (½ - 4¾'')
  • Dead Weight kg (lbs): 57 (125)
  • Surface: Galvanized

AL-33-V [51200042]:

  • Cutting Length mm (in): 330 (13'')
  • Cutting Height mm (in): 10-120 (½ - 4¾'')
  • Dead Weight kg (lbs): 41 (90)
  • Surface: Galvanized

AL-33/D-V [51200049]:

  • Cutting Length mm (in): 330 (13'')
  • Cutting Height mm (in): 10-120 (½ - 4¾'')
  • Dead Weight kg (lbs): 41 (90)
  • Surface: Galvanized

AL-43-V [51200043]:

  • Cutting Length mm (in): 430 (17'')
  • Cutting Height mm (in): 10-120 (½ - 4¾'')
  • Dead Weight kg (lbs): 57 (125)
  • Surface: Galvanized

AL-43/U-V [51200046]:

  • Cutting Length mm (in): 430 (17'')
  • Cutting Height mm (in): 10-300 (½ - 11¾'')
  • Dead Weight kg (lbs): 66 (145)
  • Surface: Galvanized

AL-65-V [51200047]:

  • Cutting Length mm (in): 650 (25½'')
  • Cutting Height mm (in): 10-120 (½ - 4¾'')
  • Dead Weight kg (lbs): 88 (195)
  • Surface: Galvanized

AL-65/U-V [51200048]:

  • Cutting Length mm (in): 650 (25½'')
  • Cutting Height mm (in): 10-400 (½ - 15¾'')
  • Dead Weight kg (lbs): 98 (215)
  • Surface: Galvanized


AL-15-V
[51200037]:

  • Cutting Lenght mm (in): 170 (6½")
  • Cutting Height mm (in): 40 – 100 (1 ½ – 4")
  • Dead Weight kg (Ibs): 19 (42)
  • Surface: Galvanized

  • Profi-Werkzeuge / Professional Tools: AL-33 / MAL / PM