RK-I/-II/-III Manhole Ring Clamp

Also suitable for manhole rings (DIN 4034 Part 1 and 2) due to its extra-deep claws and rubber supports.
Gradual adjusted to the dimensions of the manhole ring by bolts. As only the side wall is gripped, no radial pressure is exerted. Making it suitable for handling green products.

RK-I

RK-II

Further information

Fully mechanical operation, so it can be used with any lifting equipment.
Crane eye for attaching to crane hook.
Fully automatic change-over from “full” to “empty”.

Technical details

Type	Order no.	Diameter Nominal Diameter	Gripping Range	Dead Weight	Working Load Limit/WLL	Number of Claws
RK-I	57200030	800-1500 mm	80-160 mm	170 kg	2000 kg	2 Stk.
RK-I-US	57200032	914-1524 mm	80-160 mm	240 kg	3200 kg	2 Stk.
RK-II	57200033	1500-2500 mm	80-160 mm	320 kg	3000 kg	3 Stk.
RK-III	57200036	2000-3000 mm	80-160 mm	350 kg	3000 kg	3 Stk.

Accessories

ET with cross link:

Fork sleeve for fork lift peaks. Suitable for RK or other devices, mounted directly above the gripper including lifting eye for attaching to crane hook.

ET with cross link USA:

Fork sleeve for fork lift peaks. Suitable for RK or other devices, mounted directly above the gripper including lifting eye for attaching to crane hook.

ET-RK:

Fork sleeve for fork lift peaks. Suitable for the RK, off set design to save lifting height.

ET-RK:

Fork sleeve for fork lift peaks. Suitable for the RK, off set design to save lifting height.

ET 90° incl. cross link

Type	Order no.	Description	Dead Weight	Working Load Limit/WLL
ET with cross link	47100010		65 kg	4000 kg
ET with cross link USA	47100106		65 kg	4000 kg
ET 90° incl. cross link	47110002		61 kg	4000 kg
ET-RK	47200002	Fork Sleeve with cross link for Manhole Ring Clamp	130 kg	3500 kg
ET-RK	47200028	Fork Sleeve with swivel hook for Manhole Ring Clamp	140 kg	3500 kg