Hydraulic Accessories

Hydraulic Hoses
1 set = 2 hydraulic hoses including quick coupplings between the fork lift and the fork sleeves or crane boom, length each approx. 1,200 mm (47,24 inch).

Electromagnetic Change Over Valve ELMV
Fitted to the clamp, in case there is only one hydraulic circuit on the side of the fork lift for “clamping” and “turning”. Supplied with the required electrical relais and push button, but not the electrical connections to the fork lift truck.

Electromagnetic Change Over Valve ELMV-DZ
Fitted to each of both clamps of the fork lift double clamp attachment STAZ-DZ II, for the separate control of the two single clamps. This means that the double clamp can be used to transport only one stack, as and when required. Supplied without electrical connections to the fork lift truck.

Electrical Connection-Kit between STAZ-DZ-II and forklift
Consisting of:
- Complete electric wiring of the attachment, installation of the components into the forklift has to be carried out by the customer.
- Spiral cable between forklift and attachment, control box and control elements.
- Turning light for warning purpose for V-attachment on crane boom KA.

Safety valve
Valve installed on grab if second release function (accidental release) in accordance with DIN EN ISO 3691-1 missing from supporting device.