Fork Sleeves for Forks

For fixing onto the fork tines, with locking device on the forks.

Attention:?loss of lifting height ( Clamp inside height ?+ approx. 495 mm, according to the model).
Various types of fork sleeves are available,
depending on the jobs in hand or the attachment device:
Fork Sleeves ET-IS-UNI with cardanic suspension of the clamp:
Designed for the installation of a hydraulic rotator as well as for the installation of a hydraulic swing damper (Only suitable for STAZ?and STAZ-DZ-I). With security chain to avoid slipping.
Fork Sleeves Fixation ETA for ET-IS-UNI:
To avoid that the ET-IS uni slips off the forks. Different reach achievable by pin-adjustment.
Fork Sleeves ET-III-UNI for single clamps:
Screwed fix to the clamp to be picked up by the forks of the fork lift truck.
Can also be installed in a 90° turn position, due to the symmetrical flange plate.
Fork Sleeves ET-E-4 for single clamps:
Screwed fix to the clamp to be picked up by the forks of the fork lift truck.
As the fork sleeves can be picked up from the front and from the side it is possible to place the STAZ grippers either lenghtwise or across to the fork lift.

Further information

  • Advantage:?short change-over time when adding other attachments to the fork lift.

Technical details

TypeOrder no.DescriptionLoad Extension (mm)Weight Dead Weight (kg)Working Load Limit/WLL (kg)
ET-IS-UNI-50647110074variable10001404000
ET-IS-UNI USA47110023variable10001504000
ET-III-UNI for STAZ-UNI-447110016variable7001304000
ET-III-UNI for STAZ-UNI47110019variable7001304000
ET-E-447110052440-940984000

Accessories

TypeOrder no.Description Load Extension (mm)
ETA47110036Fork Sleeves Fixation (pair) 1000-1450

Do you have any questions?

No delays, no "detours" – you can count on us! By e-mail, phone or app: Our team is ready to help you find the right solution.